Elite Sales & Technology, LTD is a Supplier of Custom Manufactured Molded & Injected Plastics, Touch Screens, Custom Keypads, Membrane Switches, Connectors & Light Guide Film Used in Various Electronic Control Systems
Custom Double Shot and Single Shot Injection Molding Manufacturing Services
At Elite Sales & Technology, LTD, we specialize in molding high quality, tight tolerance plastic parts in quantities from prototype to large scale production runs. Along with 120- to 300-ton single shot injection molding presses, we also have 50- to 500-ton double shot injection molding presses.
Our ISO-certified facility has two clean rooms (10,000 class and 100,000 class) where we can maintain precise environmental conditions to meet the strict requirements of the medical and electronics industries.
Working with all types of resin materials, we are capable of single shot injection molding and double shot plastic injection molding, insert molding, over molding, and liquid injection molding, which is particularly suitable for medical parts.
We also have four in-mold decorating lines that allow us to economically fabricate parts with different colors, textures, and long-lasting graphics. Skilled at producing waterproof parts and testing to IP68, we test 100% of these products. We also maintain four electronic manufacturing services (EMS) assembly lines to supply tested and approved units.
We offer engineering assistance to all our clients, and provide many value added secondary services. With many clients in the medical, electronics, automotive, and communication industries, among others, we have experience manufacturing parts used in appliances, office equipment, industrial controls, as well as consumer electronics and medical devices.
To learn more about our extensive capabilities, read below, or contact us today to learn how our start-to-finish, customer-driven double and single shot injection molding services can accommodate your application.
Highly precise plastic injection molding was required to produce this waterproof camera case. Building to the customer specifications, this 380 gram case required insert molding of the front and rear of the case, as well as double injection molding of the keys and push button.
Measuring 130mm x 80mm x 95mm, the case is composed of polycarbonate and TPE, with black and red coloring. Each unit was pressure pot tested, which involved subjecting it to the equivalent of 50 meters of water... Read More
The controller shown here was designed for use in hospital bed application, and required three individual plastic injection molding processes. The front cover was double injection molded, and had the keys inserted into the mold, this process is known as "co-molding". Single injection molding was used to manufacture the rear case, and the keys utilized in mold decorations to apply the symbols.
The finished controller measured 190.5mm x 69.85mm x 31.75mm, and was composed of polycarbonate and TPE. Ergonomically designed for ease of use, the buttons are laid out for easy accessibility. The unit is also completely sealed against spills for ease of cleaning... Read More
Used in the telecommunication industry, this keypad is molded from polycarbonate and required two color, double plastic injection molding, which was performed on our double injection press. The combined shots weighed 25 grams, with a finished size of 82.55mm x 63.50mm x 14.2875mm. As with all of the products we produce a regimen of rigorous quality control was implemented into production.
The completed part featured graphics that are protected from abrasion, and material that will allow backlighting if required... Read More
The medical massage tool shown here was fabricated by insert molding die cast aluminum components with polycarbonate and TPE. Molded to the customer supplied specifications, the finished product measured 152.40mm with an approximate diameter of 38.10mm.
Weighing 500 grams it was ergonomically designed for firm, comfortable grip with backlighting possible to confirm power... Read More
Used within an ATM scanner/bar-code reader assembly, this custom insert molded cover is composed of aluminum with polycarbonate and TPE. Fabrication included insert molding, overmolding, and surface printing; the finished part measured 204.80mm in length, 288.93mm in width, and 39.70mm in height. The processes applied to manufacture this component provide a durable, robust finish that will hold up to years of heavy use... Read More
Custom Molded and Injected Plastics Capabilities
Engineering Assistance with Clients Prototype mock-up Sample
Value Added Process Post Molding EMS and Contract Assembly
Double Plastic Injection (2 Shot Molding) Single Plastic Injection Over Molding Insert Molding
In Mold Decorating (IMD) Liquid Injection Molding (LIM) Metal Injection Molding (MIM)